@Ermos - THX 
That would cover all my needs. What model is that?
Cisco - WS-C2960L-8TS-LL - Catalyst 2960L-8TS-LL - Switch
or?
Cisco - WS-C2960L-8PS-LL - Cisco Catalyst 2960L-8PS-LL
or?
The only challenge that I have with this switch, it is managed. I don’t have a good knowledge about who to config at switch, I would prefer an unmanaged. The nice thing about unmanaged: Just instal it and forget about it.
But the specs are perfect.
Torben
PS: It seems that 2960-L is “End-of-Sales”
Hi,
I got a switch from Sotm, it works great. Not sure it considered as audiophile switch or not.
Just one caveat to Erno’s otherwise excellent recommendation; if you’re buying new, although the 2960 is still available from many retail sources, it’s actually a discontinued model (albeit it’s still supported when purchased new from any Cisco channels).
If you’re still game for a Cisco, get the Catalyst 1000 series instead - specifically, the C1000-8T-2G-L is likely what you want, or better yet the C1000-8P-E-2G-L model which uses an external 12V Power Supply (so you can pick your favourite low-noise 12V LPSU to combine with it).
For your intended use and price-wise, there’s no significant difference between them.
Hi Anup,
You probably mean C1000-8T-E-2G-L for the one with external PSU - the C1000-8P-E-2G-L is a model with POE that most people won’t need I think?
Hi Torben,
You would need the Cisco - WS-C2960L-8TS-LL. The P model is with POE (Power over Ethernet).
It is indeed end of sale. That means, as @Anupc indicated, that you still can buy it through official channels, and at a significantly lower price. My brand new WS-C2960L-24TS-LL (24 ports/ 4 SFP) was under € 500.
You could compare actual pricing between these two, and make up your mind.
The easy setup guide is here , so you can have a look if you can do that.
Quite right! My mistake 
@Paul_Bemelmans - Thanks Paul.
If I understand you right, than C1000-8T-E-2G-L is a 12V (i assume 12V - seems to be standard) that need a SMPS or LPS?
Torben
PS: I assume that you don’t have to pay yearly licence fee (back in “old” days you had too pay each year a fee)
Yeah, that’s what Anup suggests. I suspect that this -E- model actually ships with a power brick of some sort; which you then could replace with an “Audiophile” one.
Very happy with my Melco S100 but recognise that it is at the rather expensive end of the spectrum!
AS a long time user I agree but the OP says on his brief :
Does “no comment” constitute a comment?
Asking for a friend. 
Only the P version has an external power brick, see below, and is a PoE version. The T version has just an internal PSU.
Note that it has a proprietary power connector to the switch. But anyway, you don’t want a PoE version.
I thought it might be good to go back to your original question… and ask some in return
Why do you want to replace it? Simply because it’s end-of-life? Many people would just carry on using it until it fails, which could be years away.
Unless I’m mistaken, I think I may be able to part answer my own Q. I think your current switch has no SFP so if you get one with SFP you can ditch the separate Startech FMC. Correct?
Why do you need so many ports? I thought you only used 2, but maybe I’m misremembering your schematic or it showed only highlights.
Do you connect non-hifi components to the switch too?
Unmanaged makes sense to me.
Aluminium/metal case makes sense to me.
Fanless/quiet makes sense to me.
It would be a waste of an audiophile switch to install it near your router, with multiple (and possibly non-audio) devices attached.
My current switch has 2 X SFP And yes I already have a StarTech FMC
Only audio is attached to this switch
Torben
In case anybody need the information. This a list of SFP’s that would work with C1000-8T-E-2G-L
GLC-TE
GLC-BX-D
GLC-BX-U
GLC-EX-SMD
GLC-SX-MMD
GLC-LH-SMD
GLC-ZX-SMD
CWDM-SFP-XXXX
Below chat with Cisco:
Torben
The whole subject of requiring specific SFP’s for network devices pees me off! Especially when it turns out they are identical SFP’s to the ones you already own, just with a different set of manufacturer codes.
Not quite, Erno. I had a typo in my post that Paul corrected; the 8T-E-2G-L model is non-PoE but with an external 12V power brick (I actually have a unit at home though not in use). The PoE external PSU version has 54V Power Brick.
Maybe I’m missing something, then why are you looking for a new switch? 
What Switch is it?
YES - And i many cases it locks you trying new SFPs.
But that is not the only thing to watch out for. Some of the above SFPs need attenuator when it is below XX km.
In the case of GLC-EX-SMD:
Distance ≤ 10km = Attenuator 10dB
Torben
